Contact us
+358 20 789 5900 or with form
Offer request 0
Masonry mortar M100/600
Masonry mortar M100/600 Winter
Compact mortar M100/600
Compact mortar M100/600 Winter
Compact mortar Heavy M100/600
Compact mortar Heavy M100/600 Winter
Winter-time masonry mortar TML
Block mortar M100/500
Block mortar M100/500 Winter
Stone adhesive KVL
Mortar for tongue-and-groove blocks PHL
Mortar for tongue and groove blocks PHL Winter
ELT Brick element grout
ELK Clinker element grout
« Back to the product group

Compact mortar M100/600 Winter

Ask for more information

Product description

Fescon Compact mortar M100/600 Winter is a cement-based mortar for burnt and sand-lime brick masonry for facades exposed to harsh winter weather in the temperature range -15°C…+5°C. Suitable for repointing brickwork and natural and slate stones on vertical surfaces, and for repairing mortar joints. Contains additives to improve density, weather resistance and workability. 

  • For the masonry of facades exposed to harsh weather conditions.
  • Low water absorption value
  • Reduces the water permeability of the cavity wall
  • Weatherproof
  • Good workability
  • Compressive strength M 5
  • Available in 20 standard colours. Colored products are custom-made products, see delivery terms and conditions
  • Special colours can be tinted to match the project requirements

Applications

  • For locations subject to heavy slanted rain
  • For work jointing and jointing of natural and slate stones on vertical surfaces
  • For repairing existing mortar joints
  • For repointing of brickwork
The product is listed in the portal for building products that can be used in Nordic Swan Ecolabelled buildings.
GTIN code Product name Product number Package size
6416841331106 COMPACT MORTAR M100/600 WINTER 1000 KG 33110 1000 kg
6416841335418 COMPACT MORTAR 39 QUARTZ WHITE WINTER 1000 KG 33541 1000 kg
6416841331199 COMPACT MORTAR 59 BIRCH BARK WHITE WINTER 1000 KG 33119 1000 kg
6416841345424 COMPACT MORTAR 40 LIME GREY WINTER 1000 KG 34542 1000 kg
6416841345417 COMPACT MORTAR 41 GRAIN YELLOW WINTER 1000 KG 34541 1000 kg
6416841345158 COMPACT MORTAR 42 BRICK RED WINTER 1000 KG 34515 1000 kg
6416841345455 COMPACT MORTAR 45 EARTH BROWN WINTER 1000 KG 34545 1000 kg
6416841345622 COMPACT MORTAR 46 PEAT BROWN WINTER 1000 KG 34562 1000 kg
6416841345479 COMPACT MORTAR 48 BLACK GREY WINTER 1000 KG 34547 1000 kg
6416841345172 COMPACT MORTAR 52 LINEN LIGHT WINTER 1000 KG 34517 1000 kg
6416841345486 COMPACT MORTAR 44 SAND BROWN WINTER 1000 KG 34548 1000 kg
6416841335579 COMPACT MORTAR 71 SWAN WINTER 1000 KG 34557 1000 kg
6416841345615 COMPACT MORTAR 72 BELOW WINTER 1000 KG 34561 1000 kg
6416841345684 COMPACT MORTAR 73 CUCKOO WINTER 1000 KG 34568 1000 kg
6416841345547 COMPACT MORTAR 74 HAWK WINTER 1000 KG 34554 1000 kg
6416841345561 COMPACT MORTAR 75 LARK WINTER 1000 KG 34556 1000 kg
6416841345509 COMPACT MORTAR 77 JACKDAW WINTER 1000 KG 34550 1000 kg
6416841345608 COMPACT MORTAR 79 PTARMIGAN WINTER 1000 KG 34560 1000 kg
6416841345660 COMPACT MORTAR 80 SIBERIAN JAY WINTER 1000 KG 34566 1000 kg
6416841345585 COMPACT MORTAR 81 TEAL WINTER 1000 KG 34558 1000 kg
6416841345516 COMPACT MORTAR 82 CAPERCAILLIE WINTER 1000 KG 34551 1000 kg
6416841345677 COMPACT MORTAR 83 WILLOW GROUSE WINTER 1000 KG 34567 1000 kg
6416841345639 COMPACT MORTAR 85 RAVEN WINTER 1000 KG 34563 1000 kg
6416841345653 COMPACT MORTAR 86 HAZEL HEN WINTER 1000 KG 34565 1000 kg

Base

  • The temperature of the masonry brick or structure is above > -15°C
  • Brick, natural stone, slate
  • Brick pallets are protected from rain. The bricks must not be wet or covered with snow or ice.

Priming

  • Masonry structures are not primed

Mixing and application of the product

  • Masonry work should not be carried out in direct sunlight, in the rain or during strong winds.
  • The working temperature should be between +5°C and -15°C. The joint effect of wind and frost must be taken into account.
  • A bag (25 kg) of dry powder is mixed with 2.9 to 3.8 litres of clean water. 
  • Do not add all the water at first. The mixture contains the correct amount of water when the mortar holds its shape and no water rises to the surface.
  • The amount of water must be as instructed in the product card. Deviating from the recommended amount of water lowers the mortar’s strength properties, increases the risk of separation, affects the strength development and reduces workability. 
  • Product is mixed with a mortar stirrer, in a concrete mixer, or with a pan-mixer or a continuous mixer to a smooth consistency. The maximum mixing time is approx. 10 minutes.
  • If the working conditions are very dry or warm, it is possible to improve the adhesion by dampening the masonry joints or bricks. There should not be water drops on the substrate.  
  • Keep the amount of water the same during jointing, because any variations in the amount of water will show as colour differences in the joint.
  • The jointing technique affects the density of the mortar joint. Finish the jointing by sealing them with a brick jointer and removing any excess mortar from the brickwork by brushing diagonally over the joints with a masonry brush.
  • The expansion joints are provided as defined in the structural plans.
  • The working time of the compact mortar is about 3 hours. 
  • When finished working, wash the tools immediately with water.
  • Remove any dried mortar mechanically.
  • After casting you should keep the mortar joints moist by fog spraying for about 3 days depending on the conditions or the target.
  • After casting, you should keep the mortar joints moist at temperatures below 0°C by fog spraying for about 3 days, depending on the conditions or the site

Repointing to a previously masonry joint

  • Available in 20 standard colours. Special colours are subject to order.
  • When repointing, the old mortar must first be removed to a depth of at least 20 mm, but no more than 15% of the masonry depth or according to the designer’s instructions
  • In repointing, the existing mortar joint is removed to a depth of at least 15 mm.
  • The joint is cleaned of dust and dampened.
  • When repointing, add the dry powder to the instructed amount of water and let it stand for about 10 minutes. After that, remix the paste and add masonry mortar to make the paste semi-dry. This mixing method ensures the sufficient air content of the mortar.
  • When repointing, start first with vertical joints and after that work with the horizontal ones. Repoints that are over 20 mm are done in two phases.
  • The working time of a semi-dry mortar for repointing is 1 to 2 hours.
  • After casting you should keep the mortar joints moist by fog spraying for about 3 days depending on the conditions or the target.
  • Bases or masonry units with low water absorption are repointed with Repairing plaster KL 1.2 or Facade coating JSP 1.5.

Other points to note

  • Construction planner instructions and official regulations are to be followed in all masonry work.
  • Not suitable for masonry of the inner shells of fireplaces or wood-burning stoves nor masonry of chimney flues indoors.
  • Masonry mortars may have slight differences in shade between small and big bags, as well as between the mortars intended for winter and summer time masonry, so it is not advisable to change the type of mortar in the middle of the wall.
  • When the temperature drops below -15°C, the masonry area should be covered for seven days to prevent it from freezing.
  • Winter products will be available in the winter season, from 15 September to 1 March. At other times, the products must be ordered separately.

Storage and handling of waste
See the separate storage and disposal instructions https://www.fescon.fi/en/material-bank

Water requirement 2.9 - 3.8 l/25 kg
Type powder
Binder cement
Colour available in 20 standard colours, special colours subject to order
Maximum grain size

2.0 mm
Package size 1000 kg
Storage

storage time in a dry location approx. 1 year
Additives

additives to improve density, workability and weather resistance, and reduce the freezing point of water
Usage temperature

-15°C...+5°C
Workability time 1 h
Compressive strength

M 5
Adhesion strength

≥0.16 N/mm2 (SFS-EN 998-2, 5.4.2 a)
Reaction to fire A1
Heat conductivity 0.97 [w/(m•K)], P=50%
Chloride content < 0.1 % (EN 998-2:2016)
Frost resistance yes
Water absorption by capillarity

0.1 kg/(m2 · min0,5) (EN1015-18)
Limitation of liability, product use notes and restrictions: Please familiarize yourself with Fescon Oy's general terms of delivery and the design and work instructions related to the product.