« Takaisin tuoteryhmään

Nanten IHP Injection Resin

Kysy lisätietoa

Tuotekuvaus

2-component, colourless epoxy resin for repairing cracks and damage in concrete structures.

For filling and strengthening cracks and damage in concrete and other structures by injection
Also suitable for anchoring and leveling grouts in machinery foundations and steel bolt installations

Käyttökohteet

For filling and strengthening cracks and damage in concrete and other structures by injection

Tuotteet

GTIN-koodi	Tuotenimi	Tuotenumero	Pakkauskoko
	NANTEN IHP INJEKTIOHARTSI A-OSA 0,66 L	15800	0,66 l
	NANTEN IHP INJEKTIOHARTSI B-OSA 0,33 L	15899	0,33 l

Käyttöohjeet

Mixing

Mix Part A and Part B of the Injection Resin thoroughly together.

Mixing ratio

Part A: 2 parts by volume
Part B: 1 part by volume

Injection by absorption

Concrete floors with network cracking caused by rapid drying can be injected by absorption. Fine cracks (0.5–2.0 mm) and small voids are filled with injection resin. Repeat the treatment if necessary to ensure the crack or void is completely filled.

Injection by pressure

Wider cracks can be filled with a putty made of injection resin and thickening fibre (Sylothix) or fine sand. In deep and narrow cracks, it is recommended to use injection packers inserted into diagonally drilled holes along the sides of the crack, allowing injection with a press or pump.

Varastointi ja jätteen käsittely
Katso erillinen varastointi ja hävitysohje https://www.fescon.fi/materiaalipankki

Tekniset tiedot

Väri	Colorless
Pakkauskoko	Part A: 0.667 l and Part B: 0.333 l in a metal container
Varastointi	+5°C to +25°C, shelf life up to 12 months. Must be stored in a warm location in tightly sealed original containers.
Tiheys	Density of the mixture: 1.10 kg/l
Käyttölämpötila	During injection, the temperature of the structure must be above +10°C
Käyttöaika	Approx. 20 minutes. The working time shortens as the temperature increases.
Kuivumisaika	Touch-dry after 7 h (+25°C) and 14 h (+15°C). Fully cured in 7 days.
Vetolujuus	>1.5 N/mm²
Palokäyttäytyminen	Bfl-S1
Ilman suhteellinen kosteus	Below 80% during application and curing of the coating
Kiintoainepitoisuus	Approx. 100% by volume
Kemikaalien kestävyys	Class II
Ohenne	Do not dilute
Viskositeetti	Approx. 200 mPas
Kiiltoryhmä	High gloss
Työvälineiden pesu	Nanten Epoxy Thinner

Vastuunrajaus, tuotteen käyttöön liittyvät huomiot ja rajoitukset: Tutustu Fescon Oy:n yleisiin toimitusehtoihin ja tuotteeseen liittyviin suunnittelu- sekä työohjeisiin.

Dokumentit

Tuoteseloste

Varastointi

Instructions for storage and disposal of Nanten products 457 KB

Remember to consult the Maintenance Instructions for Coated Floors and the product Safety Data Sheet on our website at www.fescon.fi, or request a copy by calling +358 9 274 7970. Although the technical details provided in this product description are based on our best knowledge and experience, the information above should always be regarded as indicative. The user is responsible for verifying the suitability of the product for the intended application. If the instructions are not followed, the user assumes full responsibility for any resulting damage or consequences.