Waterproofing compound

  • Waterproofing of indoor walls and floors to be tiled.
  • For the treatment of interior concrete element seams to prevent cracks in the inner surface 
  • Consumption: approx. 0.7 l/m2 on walls, approx. 1.0 l/m2 on floors
  • 1-component, rollable and fibre-reinforced waterproofing compound

Waterproofing compound WS

  • Waterproofing of indoor walls and floors to be tiled
  • For the treatment of interior concrete element seams in apartment and public buildings, to prevent cracks in the completed interior surface
  • Consumption about 0.7 l/m2 on walls and floors
  • Fast-drying, single-component indoor waterproofing compound that can be rolled or sprayed

Fescoseal A+B

  • Two-component waterproofing compound for indoor and outdoor use, withstands temperatures below freezing
  • Waterproofing of walls and floors to be tiled
  • Consumption indoors 1.3 kg/m2, layer thickness 0.8 mm
  • Dries very quickly, in about 90 minutes

Adhesion promoter

  • Primer for Fescon waterproofing system
  • Can be used with all Fescon floor leveling compounds
  • Forms a good adhesive base, water-soluble
  • For indoor use

Primer KP

  • Pretreatment of substrate in the Fescon WS and Fescoseal A+B waterproofing systems
  • Brushable 
  • Water-soluble
  • For indoor use

 

Waterproofing strip

  • Waterproofing strip made of fibre used in Fescon WS and waterproofing systems
  • Size 0.15 x 25 m or 0.2 x 25 m
  • For through-holes with a diameter of up to 75 mm
  • Also available as waterproofing membrane 1.0 x 10 m

Drain flange 300x300 mm fibre

  • Used with the Fescon waterproofing system
  • Floor drain sealing
  • Fibre sealing material
  • Size 300 x 300 mm

Drain flange KL-B

  • For drains that are fully covered with a butyl drain flange before the clamping ring is installed.
  • Butyl, self-adhesive
  • Size 370 x 370 mm
  • Use: with all Fescon waterproofing systems 

Waterproofing accessories FS

  • May be used in all Fescon waterproofing systems.
  • Waterproofing strip, inner and outer corners, and through-hole flanges.
  • Public wet areas, waterproofing of homes
  • Balconies and terraces

Waterproofing accessories VE

  • Used in Fescoseal and Fescon WS waterproofing systems
  • Waterproofing accessories, waterproofing strip, inner and outer corners used in waterproofing, as well as lead-through flanges
  • Public wet areas, waterproofing of apartments and balconies and terraces

Tile adhesive plaster VSL

  • A non-sag, flexible adhesive plaster for fastening ceramic and clinker tiles
  • To concrete, tile, plastic and painted bases
  • For outdoor and indoor use
  • The properties of the plaster meet the C2, S1 and T requirements

Tile adhesive plaster ILL

  • Adhesive plaster particularly designed for large floor tiles
  • On concrete, plastic and painted bases
  • Suitable for both indoor and outdoor use.
  • The properties of the plaster meet the C2 and S1 requirements

Tile adhesive plaster SS2

  • Fastening for flexible or otherwise moving bases
  • As sheet-metal walls, and for fastening natural stones
  • For outdoor and indoor use
  • The properties of the plaster meet the C2 and S2 requirements

Tile adhesive plaster SSL Lite

  • A light-coloured, non-sag, lightweight, M1-rated adhesive plaster with cement binder
  • To concrete, tile, plastic and painted bases
  • Suitable for indoor and outdoor use
  • The properties of the plaster meet the C1-, S1-, T- and E -requirements

Tile seaming plaster SML

  • A cement-based tile grout
  • Grouting of Dutch, clinker, mosaic and other ceramic tiles
  • Suitable for indoor and outdoor use
  • M1 classification

 

Sanitary silicone

  • One-component silicone mass for expansion joints and sealing
  • The mass is suitable for use in wet areas
  • Several colours