Base
Before applying the levelling compound, wet any dry and water-absorbent bases.
Mixing
Refer to the package for how much water the levelling compound requires. Add the dry material to the water and mix with a drill paddle for around one to two minutes. Let the levelling compound stand for around ten minutes and mix it again for a short while. The finished levelling compound remains workable for around four hours.
Spreading the levelling compound
Spread the levelling compound on the base either with a levelling spray or a steel trowel. You can recover and reuse any extra compound. When applying several layers of the levelling compound, allow the previous layer to harden completely before applying the next layer. Depending on the conditions, the hardening will take one to two days. If necessary, the dried surface is ground after the application of each layer of levelling compound.
Coating
The levelled surface can be papered, tiled or painted with a cement-resistant paint.
You can also float the surface with a moist sponge. Wait until the levelling compound has hardened a little before floating. Before laying tiles, the base must be treated with Fescon Adhesive Primer and, if necessary, also with Fescon Waterproofing Compound.
After treatment
In dry conditions, wet the levelled surface with a water spray.
Other considerations
Do not leave the levelling compound in the pumps and hoses for longer than a day. Excess moisture of the structure may cause yellowing of the putty. Surfaces must be levelled in accordance with the general quality standards for indoor renovations (SisäRYL 2013).
Varastointi ja jätteen käsittely
Katso erillinen varastointi ja hävitysohje https://www.fescon.fi/materiaalipankki