Contact us
+358 20 789 5900 or with form
Offer request 0
Nanten IHP Injection Resin
Nanten PU Tix
Nanten EP Accelerator
Nanten Anti-Slip ST
« Back to the product group

Nanten IHP Injection Resin

Ask for more information

Product description

2-component, colourless epoxy resin for repairing cracks and damage in concrete structures.

  • For filling and strengthening cracks and damage in concrete and other structures by injection
  • Also suitable for anchoring and leveling grouts in machinery foundations and steel bolt installations

Applications

  • For filling and strengthening cracks and damage in concrete and other structures by injection
GTIN code Product name Product number Package size
NANTEN IHP INJECTION RESIN PART A 0.66 L 15800 0.66 l
NANTEN IHP INJECTION RESIN PART B 0.33 L 15899 0.33 l

Mixing

Mix Part A and Part B of the Injection Resin thoroughly together.

Mixing ratio

Part A: 2 parts by volume
Part B: 1 part by volume

Injection by absorption

Concrete floors with network cracking caused by rapid drying can be injected by absorption. Fine cracks (0.5–2.0 mm) and small voids are filled with injection resin. Repeat the treatment if necessary to ensure the crack or void is completely filled.

Injection by pressure

Wider cracks can be filled with a putty made of injection resin and thickening fibre (Sylothix) or fine sand. In deep and narrow cracks, it is recommended to use injection packers inserted into diagonally drilled holes along the sides of the crack, allowing injection with a press or pump.

Storage and handling of waste
See the separate storage and disposal instructions https://www.fescon.fi/en/material-bank

Colour Colorless
Package size Part A: 0.667 l and Part B: 0.333 l in a metal container
Storage

+5°C to +25°C, shelf life up to 12 months. Must be stored in a warm location in tightly sealed original containers.
Density

Density of the mixture: 1.10 kg/l
Usage temperature

During injection, the temperature of the structure must be above +10°C
Usage time Approx. 20 minutes. The working time shortens as the temperature increases.
Drying time

Touch-dry after 7 h (+25°C) and 14 h (+15°C). Fully cured in 7 days.
Tensile strength

>1.5 N/mm2
Reaction to fire Bfl-S1
Relative air humidity Below 80% during application and curing of the coating
Solids content

Approx. 100% by volume
Chemical resistance Class II
Thinner Do not dilute
Viscosity

Approx. 200 mPas
Gloss group

High gloss
Washing tools Nanten Epoxy Thinner
Limitation of liability, product use notes and restrictions: Please familiarize yourself with Fescon Oy's general terms of delivery and the design and work instructions related to the product.

Remember to consult the Maintenance Instructions for Coated Floors and the product Safety Data Sheet on our website at www.fescon.fi, or request a copy by calling +358 9 274 7970. Although the technical details provided in this product description are based on our best knowledge and experience, the information above should always be regarded as indicative. The user is responsible for verifying the suitability of the product for the intended application. If the instructions are not followed, the user assumes full responsibility for any resulting damage or consequences.